Rolls-Royce Phantom III - crankshaft wear tables

 

Next page
Go find

 

 

All dimensions in inches to 4 decimal places; ie - measuring to one tenth of one thousandth of an inch (0.nnnn").  Grids show the last two decimal places.  The rows marked 'Front', 'Centre' and 'Rear' relate to the measurement position on each journal.

 

Crankshaft dimensions - old engine - S18K

Main Nominal 2.73++"
Brg # 1 2 3 4 5 6 7
  Max Min Max Min Max Min Max Min Max Min Max Min Max Min
Front 79 78 76 72 79 65 81 78 79 78 71 68 77 69
Centre 82 80 80 75 85 67 83 79 81 79 77 72 78 74
Rear 80 73 76 74 79 75 87 81 81 80 71 69 77 71

 

Big end Nominal 2.23++"
Brg # 1 2 3 4 5 6
  Max Min Max Min Max Min Max Min Max Min Max Min
Front 87 85 83 77 81 79 81 78 79 78 81 79
Centre 84 82 81 81 82 81 81 81 87 86 84 77
Rear 85 82 82 80 82 81 84 77 81 79 80 76

 

Crankshaft dimensions - replacement engine - Y18D

Main Nominal 2.74++"
Brg # 1 2 3 4 5 6 7
  Max Min Max Min Max Min Max Min Max Min Max Min Max Min
Front 73 70 65 57 63 52 72 60 67 54 64 57 72 67
Centre 78 76 78 78 77 76 78 75 77 76 79 72 81 74
Rear 73 69 63 60 56 52 69 56 67 58 71 55 73 73

 

Big end Nominal 2.23++"
Brg # 1 2 3 4 5 6
  Max Min Max Min Max Min Max Min Max Min Max Min
Front 80 73 80 77 81 76 78 76 78 73 81 76
Centre 85 81 83 81 84 82 81 79 84 81 83 82
Rear 76 74 78 72 78 75 77 71 75 69 79 75

 

Back to the diary
Go find
Next page